How to avoid fraud when buying Saria?
A simple key to check the amount of material in Saria:
This blog is written by experienced people, new home
builders may benefit from this:
- First of all, remember that you should never buy anything
that has small branches on it, knowing that it is made of waste material.
- Apart from this, its description is written on a corner above
each length of saria, read it carefully because 60-grade saria is more
expensive than the 40-grade head, so it is not like you are being told 60 and
handed 40.
Now let's come to the key to knowing the weight of Saria:
In Pakistan, saria from 3 sutras to 8 sutras are used, among
them, 3 and 4 are more used in common houses, 3 and 4 sutra saria are used in
roof, stairs, small columns, small beams, etc. while 6 is used in big beams or
big columns.
- A 40-foot length of three threads has a total weight of 6.8
kg, i.e. 6 kg and 800 grams, while a one-foot piece of 3-thread yarn weighs 170
grams.
- The weight of 40 feet length of 4 threads is 12.10 kg i.e. 12
kg and 100 grams while the weight of a one-foot piece is 302 grams.
- A 40 feet length of five threads weighs 18.90 ie 18 kg and
900 grams while a piece of one foot weighs 476 grams.
- The total weight of 40 feet length of the sutra is 27.22 i.e. 27
kg and 220 grams while a one-foot piece weighs 680 grams.
- The total weight of 40 feet and length of seven threads is 37.05
i.e. 37 kg and 050 grams while the weight of a one-foot piece is 930 grams.
- The total weight of 40 feet length of eight threads is 48.39
i.e. 48 kg 390 grams and the weight of one foot piece is 1.21 i.e. 1 kg 210
grams.
Summary:
Now, when you buy a saria, calculate its length after weighing it. For example, you have taken 10 lengths of 4 threads, each of which
is 40 feet long.
Now if it's 121kg then ok or there is a margin of 4-5kg up
and down at most (minor weight reduction due to saria making and a bit of rust
lying around). But if the weight of 40 feet 10 lengths of 4 strings are becoming
100kg, then understand that you are being limed, and this is a wrong number
with a factory or a factory.
This post is not for everyone but a few people have done a
lot of work by following this method.